The perfect all-in-one companion for Tone Modeling and reamplification
- Three accessories in one: Tone Modeling, amp recording and reamplification
- Connects your audio interface to your amps and cabinets with the correct signal level
- Capture your amp tone pre-cabinet without the need for microphones or load boxes
- Ground lift and galvanic isolation eliminate hum and noise
- Ideal for capturing Tone Models, also the perfect tool for reamplification
- Comes with TONEX SE (includes 200 Tone Models)
TONEX Capture is an all-in-one accessory that makes it easy to capture your real amp’s tone perfectly, with or without microphones. It’s the ideal way to tone model your gear using the TONEX software, but also the perfect
reamplification device.
There are two separate gain stages that allow you to adjust levels to and from your amp.
First, TONEX Capture connects to the output of your audio interface and allows you to feed that signal to your amp at just the right level using the left attenuation control.
Second, TONEX Capture connects to your amplifier’s line out (a speaker must be connected) or pedal output and allows you to feed that signal to your interface at the right level using the right attenuation control.
The end result is a pristine copy of your amp’s real tone, ready for TONEX modeling or any other use you can imagine.

Direct Amp
- TONEX Capture allows you to feed your amp with exactly the right signal using the left attenuation control
- TONEX Capture “From Amp” circuit takes a copy of your amp’s direct output and safely sends it back to your audio interface’s input
Capturing the signal direct means you can record anywhere, without microphones or sound isolation. You can use TONEX’s and AmpliTube’s VIR™ technology to access hundreds of ultra-authentic virtual cabs and IRs to complete your tone.

Amp + Cab
Have access to a nice mic collection and recording space? You can also use TONEX Capture to capture your sound including your cabinet.
- Connect TONEX Capture to your amplifier and audio interface as usual
- Mic up your cabinet as you prefer using your interface or standalone mic preamps
Capture your rig’s exact tone without sacrificing flexibility. TONEX’s AI Machine Modeling is so advanced it can even remove the cabinet sound after the fact, letting you virtually audition other cabs and mics to see how they improve your tone.

Amp + Cab Plus Direct
The best of both worlds. Connect both direct amp and amp + cab for ultimate freedom to build the best guitar or bass tone.
- Use both the TO AMP and FROM AMP circuits, plus mic up your cabinet
- The TONEX software can capture either mic’d or direct signal for Tone Modeling
Since Capture’s FROM AMP circuit is totally passive, it won’t impact the load on your amp or color your tone in any way.

Pedals
TONEX Capture makes it easy to tone model pedals, or just route your recordings through your pedal collection for analog color and warmth.
- Connect your audio interface to a pedal using Capture’s TO AMP circuit
- Send the pedal back to your interface’s instrument input
It’s that simple!

Dimensions
- Size: 13.7cm/5.39" x 15.8cm/6.22" x 4.5cm/1.77"
- Weight: 980g/34.57oz
1 – All claims require a purchase receipt. It is the customer's responsibility to present it when making a claim.
2 – Except as stated below, in-store sales are final and items purchased may not be returned. By completing their transaction, the customer acknowledges that they have taken the item(s) in optimal condition.
3 – Guitars, basses, pedals, amplifiers, accessories, and tubes are not returnable. By paying for the item, the customer acknowledges that: (i) they inspected it and found it to be in optimal aesthetic condition without defects; and (ii) they tested it and it was functioning properly.
4 – All claims due to defects are subject to the manufacturer’s terms and conditions.
5 – Guitars, basses, pedals, and amplifiers will have a 30-day warranty. The electronics of guitars and basses will have a 90-day warranty. Guitars Boutique, at its sole discretion, will decide whether to repair, replace parts or components (with identical ones), and/or replace the item with an identical one.
6 – At the store's discretion, defective items may be exchanged for an identical item SUBJECT to the defective item being in the same condition as when it was acquired, including its original packaging with all its accessories. This will be done as store credit only. The credit does not apply to special orders or lay-away.
7 – All merchandise leaving the store will be considered as used in the future.
8 – No refunds will be given, regardless of the person.
9 – Special, clearance, or discounted items are not returnable.
Puerto Rico only.
In case of a return, the shipping cost will be deducted from the refund.
Guitars Boutique ships to PR via federal mail USPS, UVA, and iWide.
Estimated delivery time once the order has been shipped:
- Lightweight items, less than 14 pounds are shipped via USPS.
- Heavier items are shipped via iWide and UVA.
- No shipments are made on Sundays.
Guitars Boutique is not responsible for delays caused by shipping companies.
- The buyer is responsible for the care of their instrument/equipment against changes in temperature, humidity, and unstable current.
All guitars, basses, pedals, and amplifiers will have a 30-day warranty. - The electronics of guitars and basses will have an extended warranty of 90 days.
- Suppliers, who generally reserve the right to decide whether to repair, replace parts or components (with identical ones), and/or substitute the item with an identical one, at their sole discretion.
- Exchanges, if warranted (at the store's discretion) and if the product is in optimal condition (including its packaging), are for store credit only.
- Credits do not apply to special orders or lay-away.